v5.3 25523
© 2005 Directed Electronics, Inc.
P
ROFESSIONAL
S
ERIES
Remote Control Car Starter Model 25523T Installation Manual
PLEASE READ COMPLETELY BEFORE BEGINNING
Congratulations on your purchase of the AutoCommand
®
Professional Series Remote Car Starter. The AutoCommand
®
Professional Series Remote Car Starter system allows you
to start the car by remote control from the comfort of your home or office in order to cool it down in the summer or heat it up in the winter.
AutoCommand
®
Professional Series is for
automatic transmission/fuel injected vehicles only
. It is an extremely sophisticated system with multiple built-in safety and
security features.
AutoCommand
®
Professional Series Car Starter:
• Will start your car by remote control, and run the heater, defroster, or
air conditioner to warm up or cool down the car from up to 1,000 feet
away.
• Is quality engineered, microprocessor controlled, and made in the
USA to provide many years of reliable use.
• Is designed to start the car only if it is in park, and only if the hood is
closed.
• Will attempt to start the car for up to six seconds, but no longer (to
avoid damage to the starter motor). Should the car not start, or if it
stalls after starting, the remote starter will make two further attempts
to start it.
• Will not let the car be driven without the key in the ignition.
• Shuts itself off automatically after 10 or 15 minutes (programmable)
if you forget to come out to your car.
• Will shut off if the brake pedal is pushed, the hood is opened, or the
transmission is shifted out of park - unless the key is in the ignition
and in the “run” position.
• Allows you to remove the key while leaving the car running with the
doors locked for up to 10 or 15 minutes utilizing the Quick Stop™
Option. (See Separate User Tip Sheet)
• Starts the car automatically whenever the temperature drops below
0
°
F(-18
°
C), or if the battery voltage drops below 11 volts when the
Cold Start™ Option is used. (See Separate User Tip Sheet)
• Has the “Daily Start™” feature which allows the vehicle to be started
at the same time the following day. (See Separate User Tip Sheet)
• Comes with a Limited Lifetime Warranty.
www.designtech-intl.com • www.directed.com • 800-876-0800
* For free vehicle specific wire information consult our
websites at www.designtech-intl.com or www.directed.com
Power Harness
Control Harness
ON/OFF Switch Jack
In-Gear Switch (inside case)
Color
Function
Circuit Type
Required
Orange
Brake
(+) Input
Yes
Purple
Hood Switch
(–) Input
Yes
Green
Tach
(–) Input
No
Red/White
Remote Input
(–) Input
No
Red/Black
Diesel
(+/–) Input
No
Circuit
Color
Function
Type
Required
Pink
Power (+12V)
Input
Yes
White
Accessory
Relay output
Yes
Yellow
Starter
Relay output
Yes
Blue
Ignition 1
Relay output
Yes
Green
Ignition 2
Relay output
Consult Wiring Guide*
Black
Ground
Input
Yes
Coax
Antenna
Jack
Color
Function
Circuit Type
Required
White/Black
Ignition #3
(–) 400 mA
Consult Wiring Guide*
Brown/White
Alarm Disarm (–) 400 mA
Consult Wiring Guide*
Brown
Accessory
(–) 400 mA
No
Blue
Horn
(–) 400 mA
No
Yellow
Lights
(+) Relay Output
No
White - Option
Red LED Light
Red - Code Learn
2 Protected by
DesignTech Labels
Parts List included with the AutoCommand
®
Professional Unit:
6 Power and Ignition wires
Antenna
Remote Starter
Receiver Module
Transmitters
Control Harness
(10 position)
Alchohol
Pad
Ring Terminal
Alcohol Pad
Green 30 A Fuse
On/Off Control Switch
Warning Label
The following parts are included in the plastic bag:
2 Cable Ties
Hood Pin Switch Set
Wiring Diagram
We highly recommend that all connections be soldered for reliability.
Drill with1/4”and 5/16”
drill bits
Electrical Tape
Soldering Iron
Test meter
Pliers
Screwdriver
Wire Cutters/Strippers
Tools required to install the AutoCommand
®
Professional Unit:
Yellow Butt Connector
