manualshive.com logo in svg

Directed Electronics AutoCommand 20095, Owner'S Manual

Share
Download
Directed Electronics AutoCommand 20095 Owner'S Manual Download Page 18

15

©   2 0 0 5   d i r e c t e d   e l e c t r o n i c s — a l l   r i g h t s   r e s e r v e d

Icon

The battery level icon indicates the level of power remaining in

the battery.

Icon

The temperature-controlled remote start icon indicates that the

system has entered the temperature remote start mode and auto-

matically starts the vehicle if the temperature of the vehicle drops

below 0 degrees Fahrenheit.

Icon

The silent arm/disarm icon appears when the system has been

armed or disarmed in the silent mode.

Icon

The full trigger alert icon illuminates when the security system

has been triggered by a heavy impact, door trigger violation,

optional sensor violation, or a hood/trunk trigger.

Icon

The arm icon appears when the vehicle is armed and locked. The

disarm icon appears when the vehicle is disarmed and unlocked.

Icon

Celsius/Fahrenheit icon indicates the current mode of the

displayed temperature either in Celsius or Fahrenheit.

Summary of Contents for AutoCommand 20095


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands