9
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
transmitter sensor disable
To temporarily disable a sensor input, arm the system, press the
and
simultaneously. The lights will flash four times and all warn
away trigger zones three and eight are bypassed. Press the buttons
again; the lights flash four times and both warn away and full trigger
zones three and eight are bypassed until the system is disarmed. This
can be performed anytime the system is armed.
1.
Arm the system.
2.
Using the transmitter, bypass the sensor.
3.
The lights will flash four times; all warn away zones are now
bypassed.
4.
Transmit the sensor bypass channel again.
5.
The lights will flash four more times; the sensor warn away
and full trigger zones are now bypassed.
6.
The sensor zones will reset when disarmed.
intellistart and smartwindows sensor bypass
When the system sees a command to start the vehicle via the
Intellistart, it bypasses zones three, seven, and eight, and will continue
bypass these zones until the remote start shuts down. Zone four will
bypass for 5 seconds from the time it remote starts and again for 5 sec-
onds after remote start shut down.
When the system sees a SmartWindows command for up or down
operation, the unit will automatically bypass zones three and eight until
the windows complete their operation.
Summary of Contents for Arrow 5
Page 1: ...Arrow 5 O Ow wn ne er r s s G Gu uiid de e ...
Page 35: ...32 ...
