9
© 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
three times followed by a long chirp. Zone 4 is now
bypassed.
➤
Press
a fourth time within five seconds: The siren chirps
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
➤
Press
a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
➤
Continued pressing of
will begin the Multi-Level
Security Arming cycle over again.
arming while driving
Your system can be armed while driving the vehicle. Simply press
on your transmitter for two second while the vehicle is running
or while the ignition is on. The siren will chirp once and then once
more to indicate that the ignition is on. The security system will not
respond to any input except the door triggers and the Failsafe®
Starter Kill (if installed) will not be activated. The security system
will disarm automatically whenever the ignition is turned off. The
siren will chirp twice and the LED will stop flashing.
➜
note:
Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
