background image

2

© 2003 Directed Electronics, Inc 

TABLE OF CONTENTS

CONGRATULATIONS

Congratulations for choosing a Directed
Studio neodymium component speaker
system from Directed Electronics.

Directed Electronics has been the
industry leader in high-quality automo-
tive security and audio equipment since
1990, and with the introduction of the
Directed Studio line of high-quality loud-
speakers for the automobile, Directed
continues to set new standards of
performance, reliability, and affordability
in the mobile electronics industry.

Featuring injection-molded fiberglass
reinforced baskets with graphite injected

cones and neodymium motors, the
Directed Studio line of automotive
speakers will excite and delight the auto
sound enthusiast with years of high
quality audio reproduction.

Directed Studio speakers are covered by
a two-year limited warranty. Be sure to
retain your original sales receipt, and
refer to the warranty section of this
guide for full details about your
coverage.

Limited Two-year Consumer Warranty  . . . . . . . . . . . . . . . . . . . . . . . . .3

Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Sound Quality  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Wire Connector Plugs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Woofer Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Tweeter Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Crossover Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Summary of Contents for s550













Reviews: