5
© 2000 Directed Electronics, Inc.
1.
RCA INPUT JACKS
- accepts line-
level outputs from head units or
signal sources at voltages from
200mV to 8 volts.
2.
GAIN ADJUSTMENT
- controls the
gain (input sensitivity) of the
amplifier. Each control sets the gain
for that half of the amplifier.
3.
CROSSOVER SELECTION SWITCH
-
controls the type of filter for each
of two on-board active crossovers.
Set crossover switches for proper
filter type depending on system
configuration.
4.
REMOTE SUB LEVEL
- controls the
subwoofer output level
5.
SUBWOOFER LOW-PASS
CROSSOVER
- use the gain and
crossover frequency controls to
adjust the subwoofer output.
6. BASS EQ
- This switch activates an
8dB bass boost circuit. Use as
necessary for low frequency
enhancement.
7.
CROSSOVER FREQUENCY
- controls
the frequency range of the ampli-
fier. Each half of the amplifier can
be set independently for optimum
performance.
8.
LED INDICATOR
- the green Power
LED lights to indicate normal opera-
tion. The green LED will shut off to
indicate amp shutdown due to
thermal, short circuit, DC offset, or
over-current conditions detected by
on-board protection circuits.
AMPLIFIER CONTROLS
Refer to Figure 2 for details.
FIGURE 2—AMPLIFIER CONTROLS
Summary of Contents for Model 350 Power Amplifier
Page 1: ...OWNER S MANUAL Model 350 ...
