8
Place the screen material
(1)
over the back of the frame and begin to ten-
sion the material over the screen material tension tabs
( C)
as shown in
(Fig 7)
The order of placing the screen material
(1)
into the material tension tabs
( C)
are
UP, DOWN, LEFT, RIGHT
Move along the frame and attached the screen material
(1)
into every
screen material tension tab
( C)
as shown in
(Fig 7)
The last few may require hard pulling to ensure that the screen (1) is per-
fectly flat in the frame
(2,3)
Once completed it will look like the picture in
(Fig 8)
If there are some ripples in the screen material
(1)
adjust the L Brackets
(B)
until the ripples disappear
Fig 7
3
1.0 Reel View Screen Specifications