INTRODUCTION
CONNECTING
PRODUCT INFORMATION
DC12V
Power Supply
Monitor
TROUBLE AND SOLUTION
Link wire rule
：
Power
Video
Video
12V DC
*DirectConnect
®
is a registered trademark.
*UL
®
is a registered trademark of Underwriters Laboratories.
DCHD-B494-21IR
Thank you for choosing DirectConnect
Thank you for choosing DirectConnect
®
®
Products
Products
*
Sensor
(
CCD
)
Sony 1/3
"
High Resolution CCD Sensor. 420 TV Lines
*
Night-time Vision
0.1 Lux with IR LED on.
*
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. This camera
has
The capability to produce high definition pictures in a low
Lux environment.
*
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach
1/100,000
s.
*
Gamma Characteristic
Camera Gamma characteristic
is
0.45.
*
Scanning Mode
NTSC
or PAL
*
Indoor use only
Notes
：
●
When using an optional 12VDC power supplies (not included) - make
sure the voltage, current, voltage polarity, and operating temperature
match the camera’s requirements (see specifications to verify)
●
When operating the camera in a lightning storm
,
please remember to
mount lightning arrestor or disconnect the power supply plug and video
cable
.
●
In order to capture high quality pictures, the correct wire gauge should
be used for the length requirements of the power supply cable and the
video output cable.
Congratulations on your purchase of this product. This
User Guide is for the
DCHD-D494
. This camera utilities
the latest Sony 1/3” CCD technology. This camera can be
used in day or night environments, and indoors. In addi-
tion, it owns the characters of high
definition and stability,
strong anti-jamming, rich and real color. Easy to mount.
Great for your CCTV system.
Please read this instruction manual carefully to ensure
proper use of the product.
To prevent fire or shock hazard, do not expose the unit to
The symbol is intended to alert the user to the presence of
water .
Instructions in the literature accompanying the appliance.
Uninsulated ‘dangerous voltage’ within the product’s
enclosure
that may be of sufficient Magnitude to
constitute
a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO OUALIFIED SERVICE PERSONNEL.
CAUTION: To prevent electric shock and risk of fire hazard,
do NOT use other than specified power source.
Note
:
●
Please understand the camera’s operating temperature and be
aware of its environment. Avoid using the camera at extreme high or
low temperatures. The operating temperature
is -22 ~ 140°F / -10~ +45°C
.
(Recommend operating temperature is (
-22 ~ 140°F / -10~ +45°C
.)
●
Do not allow the camera to face the sun or bright objects. Damage
may result
●
Do not mount the camera near a radiator
or heater.
1. No Picture when powered on
. Check the power supply voltage and polarity
.
. Please check all cables and monitors for proper connections.
2. The picture level direction has flowing interference ripples
. Could be caused by the power supply, an EMI / RFI filter may be needed.
. Check the monitor and peripheral equipment.
3. The picture background color changes continuously
. Fluorescent lamp’s
electromagnetic field may cause color roll. This is the
proper phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
4. Picture smear
. The power supply’s voltage is unstable
.
. Connecting cables are incorrectly connected or may have impedance.
Do not cut either cable.
This symbol is intended to alert the end user to important
operating and maintenance (instructions)
CAUTION:
RISK OF ELECTROCUTION. DO NOT OPEN
