2
Thank you for choosing DirectConnect® products
For optimum performance and safety, please read these
instructions carefully before connecting, operating, or adjusting
this product. Please keep this manual for future reference.
Table of Contents
1.0
Specifications…………………………………...
3
2.0
Features…………………………………………...
3
3.0
Package Contents……………………………..
3
4.0
Connecting Block……………..………..…….
3
5.0
Emitter Placement…………...……………...
4
Liability Statement
Every effort has been made to ensure that this product is free
of defects. DirectConnect
®
cannot be held liable for the use of
this hardware or any direct or indirect consequential damages
arising from its use. It is the responsibility of the user of the
hardware to check that it is suitable for his/her requirements
and that it is installed correctly. All rights reserved. No parts of
this manual may be reproduced or transmitted by any form or
means electronic or mechanical, including photocopying,
recording or by any information storage or retrieval system
without the written consent of the publisher.
DirectConnect
®
reserves the right to revise any of its hardware,
modify, and/or improve its products where necessary or desir-
able. This statement does not affect the legal rights of the user
in any way.
All third
-
party trademarks and copyrights are recognized.
If you do not understand the installation process, please
consult your installation specialist.
DirectConnect® is a registered trademark
UL® is a registered trademark of Underwriters Laboratories
3
1.0 Specifications
Receiver Frequency Range:
34 KHz to 60 KHz
Transmit Frequencies:
38 KHz & 56 KHz
Range:
40 ft. @ 38 KHz or 25 ft. @ 56 KHz
Power:
12VDC, 30mA max.
Dimensions:
1.77 (L) x .55 (W) x .51(H) inches
Cord Length:
9.8 ft. (3m)
Connector Type:
1/8” (3.5mm) TRS mini plug
2.0 Features
1. CFL friendly-allows for installations in areas with compact
fluorescent lighting. Works in most lighting environments.
2. Blue IR confirmation LED.
3. Wide band IR receives IR from many types of remotes.
4. Self-adhesive tape for quick and easy installation on any flat
surface.
5. 3 meter cables with 3.5mm stereo mini-plug.
3.0 Package Contents
1—Surface mount talk-back receiver (3m)
1— 2 way connecting block
2— Dual emitters (3m each)
1—12VDC 200mA regulated power supply (UL)
1—Instruction manual
4.0 Connecting Block
1. Power
— Connect the 12VDC power supply to the power jack
of the IR Connecting Block. The red LED will be illuminated when
powered. This will power all of the IR components connected to
the system.
