24-Port Gigabit Ethernet Unmanaged Switch
3
Rear Panel
Figure 1-3 DC-S-24M Rear Panel Diagram
Figure 1-3
【
Annotation
】
1.Ground Terminal
2.AC power connector
Power Supply
DC-S-24M Switch power supply adopts direct current(AC) input
：
Rated voltage range: 100-240V~
Frequency: 50 to 60 Hz
Rated current: 0.5A
Power cord requirement: 10A power cord
Cooling Solution
DC-S-24M adopts a fanless design. To ensure good hear dissipation, when placing the chassis, a space of 10cm should
be reserved on both sides of the chassis and the rear panel to facilitate air circulation. Avoid blocking the openings the
chassis, otherwise the heat dissipation effect may be affected.
Indicator
Indicator
Face plate
Marker
Status
Indication
PWR Status Light
PWR
Off
Power Off.
Solid green
Power On.
Ethernet port indicator
1~24
Off
The port is NOT connected.
Solid orange
The port is connected at 10/100Mbps.
Blinking
The port 10/100M data transceiver.
