(4)
(5)
(1)
(2)
(3)
Law Enforcement Products Manufacturer
LawMate
CMD-BU13
HD CMOS WDR Digital Camera
Quick Guide
5. Setting Video Signal System
6. Camera Calibration
MAIN MENU
SD
STORAGE
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
ESC
ESC
NEST
PAL
Digital CMOS Setting
Digital CMOS Setting PAL
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
Digital CMOS Setting PAL
(1)
(3)
(2)
(4)
1. Press selection “Setting” from Main Menu.
2. Drag the Setting Menu down to select “Digital CMOS Setting”.
3. Make the selection either PAL or NTSC based on user country’s
video signal system.
4. After selection is made, press “Digital CMOS Setting” again to
complete the setting.
1. Press selection “Setting” from Main Menu.
2. Drag the Setting Menu down to select “Digital CMOS Calibration”.
3. After selection is made, the screen will show “Calibrating” on the screen.
4. After calibration is completed, the screen will show “Cable Disconnect”.
5. User unplug connected cable to complete calibration.
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
Digital CMOS Setting PAL
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
ESC
ESC
NEST
PAL
Digital CMOS Setting
7. Interchange Covert Lens Cap
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
Digital CMOS Calibration
PAGE
0001/0009
Settings
Calibrating
Cable Disconnect
MAIN MENU
SD
STORAGE
(1)
(3)
(2)
(4)
1. Take the lens cap off and unscrew the desired covert lens cap in
counterclockwise direction from the set.
2. Place the unscrewed covert lens piece onto camera lens cap.
3. Screw in clockwise direction to secure the covert lens cap.
V1.0
2. Package Content
1. Parts
3. Camera Setup Illustration
WDR Digital Camera Lens Cap
Image Refine Connector
Camera to Connector Cable
Connector to DVR Cable
Extension Microphone
1
2 3
4 5
6 7
8
1. Camera Lens
5. HDMI Socket of Connector
2. HDMI Socket of Camera
6. Extension Mic Socket
3. HDMI Jack of Cable
7. Built-in Microphone
(optional)
4. HDMI Jack of Cable
8. HDMI Socket of Connector
Back View of
Image Refine
Connector
1. Connect camera to
C
onnector
using
the
required cable.
2. Plug
the
extension microphone
in
to
Connector
mic
socket.
3. Connect
C
onnector to portable
DVR
using required cable.
Note:
C
alibrate camera
and configure video signal system
after
inter
connectin
g
all
components
.
Microphone
Camera
Connector
Portable DVR
Extension Microphone
Connection of all Components
4. Lens Cap On
1.
Remove
the black lens cap from the screw pack.
2. Place
the cao
on the camera lens.
3. Press
the DVR
“Power” button to turn
it
on.
4.
F
ollow the steps on next page to
calibrat
e the camera
.
Covert Lens
Cap
80x120mm
80x120mm
RSWLRQDO
RSWLRQDO
RSWLRQDO
RSWLRQDO
RSWLRQDO
