5 Axis Breakout Board Interface Adapter
Direct Voltage LLC
1
1
Introduction and Features
1.1
Introduction
The latest upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase
stepper driver controller, such as M542, M542H, MA860H, 2M542, 2M982, DM542(A),
DM860(A) etc. single axis stepper driver controller series. With this 5 axis breakout board, any
1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3,
EMC2, KCAM4, etc.
1.2
Features
Maximum support 5-axis stepper motor driver controllers
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
USB power supply and peripherals powered phase are separated to protect computer security.
All the signals are opto-isolated which can protect your computer security.
5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
Wide input voltage range: 12-24V, and with anti-reverse function.
One relay output control interface, accessed by the spindle motor or the air pump, water
pump, etc.
Output 0-10V analog voltage for inverter to control the spindle speed.
2
Specifications
Electrical properties(ambient temperature Tj = 25
︒
C)
Input Power
USB port to directly get power from PC and
12-24V power supply(optional)
Compatible Stepper Motor Driver
Max 5 2-phase Microstep controllers
Driver type
Pulse and Direction signal control
Net/Total Weight
Approx 75g
Dimensions
90 * 70 * 20mm (L*W*H)
