background image

2

Before reading this manual

This manual contains basic instructions on installing and using DirectIP™ Network Video Recorder, an IDIS product. 
Users who are using this product for the first time, as well as users with experience using comparable products, 
must read this manual carefully before use and heed to the warnings and precautions contained herein while using 
the product. Safety warnings and precautions contained in this manual are intended to promote proper use of the 
product and thereby prevent accidents and property damage and must be followed at all times.
Once you have read this manual, keep it at an easily accessible location for future reference.

 • The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and 

accessories or from the user's failure to comply with the instructions contained in this manual.

 • It is recommended that first-time users of DirectIP™ Network Video Recorder and individuals who are not familiar with its 

use seek technical assistance from their retailer regarding product installation and use.

 • If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and 

seek professional assistance.

 • Both retailers and users should be aware that this product has been certified as being electromagnetically compatible for 

commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the 
presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Symbol

Publication

Description

IEC60417, No.5032

Alternating current

WARNING

Hazardous moving parts

Keep away from moving fan blades

AVERTISSEMENT

Pièces mobiles dangereuses

Se tenir éloigné des pales de ventilateurs mobiles

Summary of Contents for IDIS DR-6308P






























Reviews: