Direct IP Idis DC-E4216WRX Quick Manual Download Page 2

Page: 2 / 16

Quick Guide

Safety Precautions

1. Read Instructions

All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future

reference.

3. Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do

not use liquid aerosol cleaners. Use a damp soft cloth for cleaning.

4. Attachments

Never add any attachments and/or equipment without the

approval of the manufacturer as such additions may result in the

risk of fire, electric shock or other personal injury.

5. Water and/or Moisture

Do not use this equipment near water or in contact with water.

6. Placing and Accessories

Do not place this equipment on an wall or ceiling

that is not strong enough to sustain the camera. The

equipment may fall, causing serious injury to a child

or adult, and serious damage to the equipment. Wall

or shelf mounting should follow the manufacturer’s instructions,

and should use a mounting kit approved by the manufacturer.
This equipment and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sufficient

ventilation is required to prevent an increase in ambient

temperature which can cause malfunction or the risk of fire.

7. Power Sources

This equipment should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power, please consult your equipment dealer or local

power company.
You may want to install a UPS (Uninterruptible Power Supply)

system for safe operation in order to prevent damage caused by

an unexpected power stoppage. Any questions concerning UPS,

consult your UPS retailer.

8. Power Cord

Operator or installer must remove power and TNT connections

before handling the equipment.

9. Lightning

For added protection for this equipment during a lightning storm,

or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the equipment due to

lightning and power-line surges. If thunder or lightning is common

where the equipment is installed, use a surge protection device.

10. Overloading

Do not overload wall outlets and extension cords as this can result

in the risk of fire or electric shock.

11. Objects and Liquids

Never push objects of any kind through openings of this

equipment as they may touch dangerous voltage points or short

out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the equipment.

12. Servicing

Do not attempt to service this equipment yourself. Refer all

servicing to qualified service personnel.

13. Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to

qualified service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following

the operating instructions, adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to restore

the equipment to its normal operation.

E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance

— this indicates a need for service.

14. Replacement Parts

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer or that have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric shock