3
Product Features
●
Makes it possible to install Full-HD network cameras using existing coaxial cables.
●
10/100Base-T two-way communication allows use of the product as a transmitter or
a receiver.
●
Supports PoE (IEEE 802.3af, IEEE 802.3at)
●
Supports Plug & Play without setting up special IP addresses.
●
Supports up to 800 meters in distance.
Accessories
The product consists of the following components.
BNC
48VDC
RJ45
Power
PoE
Mac Address
Main unit
(DA-EC1101R /
DA-EC1101T)
48V DC adapter &
220V power cable
(DA-EC1101R only)
Operation Manual
MAC address
sticker
MAC Address is required for warranty services. Please keep the sticker attached on the product.
First, connect the adapter to the product. Then, turn the device On. If the adapter is connected while the
switch is turned On, it may cause an electric spark. Be careful when using the product at a gas station or
near combustible substances.
