10. Battery Charging
•
Plug needs to connect to 230V wall socket. Charging starts automatically.
o TiMOTION: LED / battery flashes green.
o Linak: Full level battery indicator flashes yellow until the battery is fully charged.
•
The battery is of the LiOn type and insensitive to how long / how often you charge the battery. Full charge on
discharged battery takes about 24 hours.
•
TiMOTION: We recommend that the battery plug be removed from the control box if the product will be out
of use for an extended period (more than one week) or if the battery is switched off by means of the ON/
OFF switch. This eliminates the risk of disabling the battery as the control box always uses a small quantity of
electricity even when the Walker is not in use.
9
I F U
System
TiMOTION
Remove the control box cover to make the connections as described
below. Use a screwdriver or similar; refer to the special labels on the
control box.
NOTE: Make sure that plugs are connected to the correct sockets
otherwise the actuators can be damaged.
1. Socket for the height adjustment actuator.
2. Socket for the width adjustment actuator.
3. Hand control socket.
4. Battery terminal socket.
5. Plug socket (NOTE: Plugs must ALWAYS be connected to the control
box for IP classification to be valid).
Linak
The door on the control box can be opened with a thumb grip.
1. Socket for the width adjustment actuator.
2. Hand control socket.
3. Battery outlet.
4. Socket for actuator up / down.
5. Socket for plug.
9. Control Box Wiring
TiMOTION
1
2
3
4
5
2
3
4
5
Linak
1
Summary of Contents for 056-309/75-B/0-PLUS
Page 2: ...Table of contents English 3 Svenska 11 ...
Page 17: ...17 I F U System ...
