Out of the box
Remove the printer from its packing.
Do not
dispose of the box.
The printer weighs 231
lbs (104kg) so at least two people are needed
to lift the printer. Place it on a
flat, stable
surface
with a minimum of
12"
(305mm) of
space on all sides. Locate the table so that
you have access to all sides of the printer.
Ensure that all leveling feet are fully on the
surface of the table. The printer should be
determined to be level in all directions.
DO NOT PLUG IN THE PRINTER YET
Getting Familiar with the
1024UVMVP
Removing Shipping Brackets
DO NOT PLUG IN THE PRINTER YET
Warning: When printer is in operation, all covers
should be installed and closed with the front cover
lock screws installed and secured. The cover should
only be opened by trained DCS personnel only
Using the provided T15
Torx tool, remove the two
front cover lock screws.
Open the front cover using
both handles.
Remove the bolts securing print
engine to shipping brackets with
the provided T-handle tool. Do not
dispose of these bolts.
Remove the warning label over the AC power
receptacle.
Plug in main power cord and flip
main power switch to ON.
The Ink Level screen will appear on the LCD
Touch Screen. Silence the alarm by hitting any of
the LOW ink lights.
Select the Home icon from the top left of the LCD
screen. Press and hold
to raise the print
engine to its maximum height.
Remove the tape from the
media table and shipping
brackets.
Remove the two brackets by
unscrewing them from the main
channel.
You cannot simply pull
these brackets out.
Do not
dispose of these brackets.
Close and secure front cover.
