6
DIR
www.dirsalonfurniture.uk
ASSEMBLY INSTRUCTIONS
Installation of Wall Mount Arm
Before Installation
1. Wall
The wall must be strong enough to support the arm assembly.
2. Height
The recommended height of the wall bracket is 1840/1950mm from the floor to
the bottom of the bracket. (see diagram)
3. Electric Source
An electrical power outlet must be prepared on the wall within 500mm distance
from the wall bracket.
2400mm
1840-1950mm
1470mm
1630mm
880mm
Installation of Wall Plate & Wall Bracket
1. The wall plate and wall bracket are already attached together with bolts upon
delivery. (See diagrams)
2. With the supplied spanner, loosen the bolts and remove the wall plate
3. Use the wall plate as a template and drill three holes on the wall (please refer to
diagram for the correct drill positioning). The size and depth of the holes will be in
accordance with the bolts supplied.
4. Attach the wall bracket to the wall with the bolts, and then fix with the supplied
washers.
5. Attach the wall bracket to the wall plate, and then tighten with bolts.
Wall plate
Wall bracket
Washer
Bolt
Wall plate
50mm
70.5mm
59.5mm
Bolt
Wall bracket
Nut
Wall plate
Bolt
Wall
Caution! As the wall plate and wall bracket are subject to a large load, please make
sure that the wall plate is installed correctly and securely.
To remove the wall mount, a spanner would have been supplied, please unscrew
the bolts and remove from the wall with care.
