Notice: It is not allowed to touch the contacts of the sockets – risk of damage due to
electrostatic discharge!
Power
ULTIAIR
wireless network device does not require an external power supply directly
connected to the device. The set includes PoE adapter. The power cord (plugged into AC
power outlet) is connected to its socket marked AC. The port marked LAN (Data Input
Port) is connected with computer or appropriate telecommunications equipment. The
outdoor/external part of the set is connected via Category 5 cable terminated with RJ-45
connector to the port marked PoE.
Operation environment
The antenna part of the set has been designed for outdoor use. It can operate in
adverse weather conditions (rain, snow, low and high temperature). However, it cannot be
placed close to chimneys, outdoor parts of air-conditioners, other antennas etc.
4
Summary of Contents for Ultiair 319KC
