10
9
3b-2. for Philips projectors
4. Hang the Projector onto the Ceiling Mount
5. Pitching Angle Adjustment
Adjust to desired location or tilt.
Press in the two bolts at the same time and connect projector plate to pipe.
Important:
Make sure the projector is correctly hooked before releasing the projector.
360°
-5° ~ +5°
Turn bolt outside for maximum
safety.
M-D
M-D
M-C
M-F W-C
M-B
M-H
M-H
M-E
Insert adjustable part into
projector.
Locate the projector’s mounting points.
Screw mounting legs onto the projector.
DO NOT TIGHTEN ALL SCREWS
AT THIS TIME.
Place the projector plate on the mounting
legs, as close as to projector center of
gravity as possible. Slightly adjust the
arms to fit slots pattern on the projector
plate. And then use screws and washers
to fix the projector plate.
Tighten the all mounting screws which
secure the mounting legs to the projector
at this time.
