2) Pull out Battery Case
slightly to the right.
1 ) Push right side of door
frame.
Prior to using the safe,
1 ) Push right side of door frame to expose battery case.
2 ) Load batteries.
* Even if batteries completely exhausted, registered codes are not erased.
3) Replace four batteries
at same time.
1.
When battery icon lights on touch panel, batteries must be replaced.
1 ) Touch
logo 2 ) Touch USER CODE
3 ) Touch OPEN
4) Open the door while
melody rings 3 seconds.
(Bi sound & touch panel lighted)
(Touching every code, Bi sound)
(Melody rings, icon )
Factory Code 1 2 3 4
2.
Batteries
Opening
* CAUTION : 1) If a wrong code entered, bi-ric sounds and icon appears on touch panel.
2) If wrong codes entered 5 times, lock paralyzes 5 minutes. After 5 minutes, paralysis gets released.
-
No response. Paralysis time appears 5-4-3-2-1 in turn on touch panel.
3) Don't open door until melody rings and OPEN icon appears.
*
When unlocking, scramble numbers can be put before and/or after real code to avoid peeps.
But, user code should be touched consecutively.
Ex) In case of user code 1-2-3-4-5-6, xxx123456xxxx
4
USER Code
PUSH
PULL
Replace Batteries
Summary of Contents for istella
Page 1: ...INSTRUCTION...
