H25CS, H125C, H200C
5
(3)
bA-LO : Indicates that the power of the batteries is low. It should be replaced.
(4)
CLOSE- : Indicates that the locking bolts are extending.
(5)
CLOSED : Indicates that the locking bolts have extended.
(6)
–OPEN- : Indicates that the locking bolts are retracting.
(7)
OPENED : Indicates that the locking bolts have retraced.
(8)
DONE : Indicates that the previous operation was finished correctly.
(9)
NEW : Indicates that you need to input the new code at once.
(10)
HOLD15 : This data appear on the screen after you input wrong code for 4 times continuously.
It means the electronic code system is locked automatically. At this time you have to wait for 15
minutes then the system will be opened.
(11)
HOLD30 : This data appear on the screen after you input wrong code for 4 times continuously.
It means the electronic code system is locked automatically. At this time you have to wait for 30
minutes then the system will be opened.
(12)
ERROR : This data means incorrectly input the code and you need to input the right code.
(13)
ERROR1 : This data means the door fails to open as the bolts get stuck. You can give a push to
the door and try to loosen the bolts.
(14)
ERROR2 : This data indicates the bolt studs get blocked and the locking bolts fail to extend.
Please push well the door and let it fit firmly.
Summary of Contents for H25CS
Page 1: ......
