3/4
INSTRUCTION PAPER
ALEXA 410-412 | Round dining table 148R
ASSEMBLY INSTRUCTIONS CERAMIC TABLE TOP
STEP 1: SECURE ALU SUPPORT
STEP 3: PLACE CERAMIC TABLE TOP
STEP 2: PLACE BUMPERS (AND WASHERS)
STEP 5: ADJUST FEET
G
H
I
J
Carefully place the alu support (M) onto the pole (B) so the pre-made
holes match. Now use the hex key (G) to fixate the alu support (M)
onto the pole (B). Make sure you follow the correct order as indica-
ted by the letters in the picture.
Carefully place the ceramic table top (N) onto the alu support with
minimal 4 persons.
Place the bumpers (O) on the correct positions as shown in the
picture. Check during setup if your ceramic table top (N) is placed
stable onto the alu support (M). If not, you can add plastic washers
(P) on the necessary postions.
Check with a spirit level if the table is placed level. If not,
(un)screw the adjustable feet till your table is completely level.
13x bumper Ø13 M5
O
13x plastic washer M5
P
1x alu support
M
1x ceramic top
N
EXTRA COMPONENTS FOR
CERAMIC
TABLE TOP:
