DIP DS-68 Manual Download Page 6

6

DS-68 - Operating manual

www.dipgrinders.ro • [email protected]

Unpacking the DS-68 On demand Grinder: 

When open the package, carefully check the equipment for any possible damage. If 
you have any doubt, do not use it and contact a qualified technician. If you have to 
ship back the equipment, this must be done in the original package otherwise the 
warranty is void.

 Warning:

 packing materials can be hazardous to children. 

Packaging Disposal: 

Dispose the packaging materials according to local laws and regulations. If you 
decide not to use the appliance any more, disconnect it from the mains, cut the 
power cable at the point where it comes out of the appliance. Contact a specialized 
recycling company. 

Proper Use:

This appliance has been designed solely for grinding coffee beans. Any other use is 
considered to be improper, and consequently hazardous. The manufacturer cannot 
be held responsible for any damage as a result of improper or incorrect use.
Do not use the appliance for grinding other types of food, or anything else. 
ALL COFFEE GRINDERS MANUFACTURED BY OUR COMPANY ARE DESIGNED TO BE 
USED BY SKILLED PERSONNEL, ONLY FOR PROFESSIONAL USE AND NOT FOR HOUSE-
HOLD USE. 
The user must be an adult. Do not allow children or people with handicap to use the 
appliance.

Installation and wiring: 

The appliance must be installed by authorized personnel only. Incorrect installation 
may result in personal injury or property damage, for which the manufacturer 
cannot be held responsible. 

•  The appliance must be placed on a stable and flat surface. 
•  Do not install the appliance in rooms where water jets are used for cleaning.
•  Before plugging in the appliance, make sure that the voltage and frequency 

values of the supply mains correspond to the rating plate. 

•  It is essential to ensure that the socket power supply is suitable for the 

appliance’s power consumption, as is indicated on the rating plate, and the 
wall socket is current fluctuation protected.

•  The wall socket must be fitted with an efficient earth contact (grounded). If in 

doubt, have it checked by an licensed technician.

•  Do not use extension cables, 

plug adapters, multiple sockets or makeshift 

connections.

Summary of Contents for DS-68




























Reviews: