10
Universal A
nchorage S
yst
em (UAS) I
nstallation
To improve safety and performance, this booster seat is equipped with a unique, Universal
Anchorage System (UAS) that allows secure attachment to a vehicle’s lower UAS anchor
locations.
Disengage UAS connectors from storage slots and lay booster seat on its side.
WARNING: Unsecur
ed objec
ts can b
ecome flying hazar
ds and can c
ause
serious injury in an ac
cident. D
iono always r
ecommends utilizing U
AS
installation in vehicles equipp
ed with low
er anchors.
1
While depressing the cam lock lever,
2
pull UAS connectors away from the booster seat and extend
both straps all the way.
3
Attach both UAS connectors to the vehicle anchors, starting
with the connector that is furthest from you. For ease of use, make
sure open end of hooks face upward during use.
4
While pushing booster against vehicle seat,
5
pull one adjuster strap tight and then the other.
NOTE: Even with UAS properly attached and adjusted, child seat
will still have movement against the vehicle seat back and bottom.
Securing the C
hild
1) Make sure booster seat is properly positioned and installed on
vehicle seat as per the instructions in page 9.
2) Properly position child: sitting upright and all the way back in the booster seat.
3) Raise the headrest to access upper belt guides. Feed the diagonal portion of the seat-
belt through the guide on the side opposite the seatbelt buckle.
