16
Rear-Facing Lap-Shoulder Belt
Installation
for children 5 lbs – 45 lbs
1
2
3
WARNING:
• You must use restraint rear-facing if child is less than
1 year and weighs less than 20 lbs.
• Detachable base must be used with rear-facing restraint.
• Do NOT use SafeStop with rear-facing child.
Fig. 1 shows a typical rear-facing installation with a
lap-shoulder vehicle seat belt.
1. Confirm detachable base is
securely attached to
restraint bottom
(see page
13)
.
2. Place restraint in proper
rear-facing position:
Restraint bottom and base
are both flat on the vehicle
seat with front of restraint
against the back of that
vehicle seat. (Fig. 1)
Note: It may be necessary to
move vehicle front seats
slightly forward to properly fit
a rear-facing restraint.
3. Route seat belt through
rear-facing belt path and
buckle it. (Figs. 2 & 3)
Confirm seat belt lays flat
and is not twisted.
Meijer.com
