Dionex UltiMate 3000 Series, Operating Instructions Manual, Page: 48 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 34 Operating Instructions
3.5.2 Installing the Pump
After the USB software for the pump has been installed (

page 32), install and configure
the pump in Chromeleon:
1. Start the Chromeleon Server Monitor and the Chromeleon server if they are not yet
running (

page 32).
2. Start the Chromeleon Server Configuration program by clicking Start on the taskbar.
Point to Programs (or All Programs , depending on the operating system), point to
Chromeleon , and then click Server Configuration .
3. If necessary, click the plus sign next to the server name to display the items
underneath.
4. Select the timebase to which the pump will be assigned, or create a new timebase (on
the
Edit menu, click Add Timebase ).
5. Open the Add device to timebase dialog box. To do so, click Add Device on the Edit
menu or right-click the timebase and click Add Device on the menu.
6. On the Manufacturers list, click Dionex HPLC: UltiMate 3000 and on the Devices
list, click the pump you want to add, for example, HPG-3x00RS Pump or LPG-
3400SD Pump .
7. The configuration pages for the pump are opened. On each configuration page, verify
that the settings are correct and select additional settings if needed. For a description
of the pages, see section 3.5.3.1 (

page 35).
8. On the File menu, click Save Installation and then close the Server Configuration
program.