UltiMate
®
3000 Viper™ Capillary Kits for Intelligent LC (LCi) System Solutions
Quick Installation Guides
Page 2
Rev. 02
January 2010
©
2010 Dionex
1.2 Definition of LCi
Dionex has developed a number of “Intelligent LC” (LCi) solutions to allow analysts to
obtain the best possible combination of performance, reliability and ease-of-operation of their
HPLC system(s). These solutions combine UltiMate 3000 hardware, Chromeleon software,
and Dionex column chemistries to solve typical analytical challenges, such as method
development, sample preparation, or increasing throughput and productivity.
1.3 Typical System Setups
1.3.1 Single-Stack
In many cases, bench space is limited; hence the Dionex UltiMate 3000 systems are designed to
consume as little space as possible. We assume that a single-stack setup is the most common
case; therefore, the LCi capillary kits have been optimized for this scenario.
Figure 1:
UltiMate 3000 system as a single stack
Note:
Figure 1 illustrates the course of the flexible Viper capillaries in general.
Dionex recommends installing all capillaries inside the modules as needed.
Summary of Contents for UltiMate 3000 LCi
Page 2: ......
