August 2003
Rev. 2
Page 7
©
2003 Dionex
4. Using the Column Identification System
The TCC-100 is fitted with a column
identification system (part no. 5710.1505) that
allows you to store column-specific information
on a chip card and read it out whenever you
want.
Clip the memory chip card …
... onto the column as shown above. (To do so,
you can open the expanding rivet by removing
the rivet head from the body.)
Take the chip card. Make sure that the Dionex
logo is facing you.
Insert the chip card (with the Dionex logo
facing up) into one of the column identification
slots.
You may now close the front panel door.
Expanding rivet
Expanding rivet
