Dionex ASE 100, Operator'S Manual

Page: 43 / 150

3 • Operation and Maintenance
Doc. 031842-01 5/02
3-11
3.1.6 Installing the Collection Bottle
1. Toggle the needle switch on the front panel (see Figure 3-3) to the
UP
position.
2. Place a 250 mL collection bottle (P/N 056284, pkg. of 12), with the
bottle cap screwed on, in the collection bottle holder (see Figure 3-3).
3. Toggle the needle switch to the
DOWN
position.
NOTE Reverse the steps above to remove the collection
bottle from the system.
NOTE Verify that the waste bottle is installed (see
Section B.2.5).
Figure 3-3. Installing the Collection Bottle