Instructions d’installation/ Installation instructions : F6413T938
Ensemble Adaptateur F61 / Adapter Kit F61 : DION
22 janvier 2013
Step 9: Installation of the feedroll guards
Position the guards as shown and bolt them with carriage bolts 5/16’’.
Adjust their position to fit between the feedroll and the side guards of the harvester.
Tighten well in place (can be done when installed on the harvester).
Step 10: Optional installation
The rubber deflectors (26) on the header are used to reduce the loss of grain or small
particles between the feedroll and header.
The channel (item 27) must be installed only in case of loss of cobs. It reduces the loss
occurring in front of the feedrolls between the rubbers. To install it, remove the
deflector bolts (28), and then install the channel. Do not remove the deflectors. In case
of plugging that may occur in wet or weedy conditions, remove the channel.
