Dion-Ag Scorpion 300, Operator'S Manual

Page: 50 / 109

SETUP
50
Figure 58 Header lift springs
FIGURE 59
Position the springs to the appropriate setting.
Figure 59 Suspension spring position
HEADER HEIGHT ADJUSTMENT
FIGURE 60
The header height adjustment is done through a double acting hydraulic cylinder for which the control
switch is located on the control box. For windrow pickups, refer to the related operator’s manual to set the
minimal working height with gauge wheels.
NOTE: Push the locking arm fully in to unlock the header lift cylinder.
Manual N o. F6918E003E v1.2