7 OF 8
IG082119-9.0
NEON BLAZE
™
24V LED Strip Light
INSTALLATION GUIDE
NEON BLAZE
™
24V LED Strip Light
INSTALLATION GUIDE
ATTACH DRIVER AND LIGHTING
CONTROL.
Verify a compatible driver is installed. Utilize
applicable wiring when installing outdoors. (Use of
wet location-rated junction box recommended)
TROUBLESHOOTING
TOOLS & RESOURCES
NEON BLAZE
™
SPECIFICATION SHEET
For full specifications.
TURN POWER ON AT CIRCUIT BREAKER
Shift in
brightness
and/or kelvin
• Ensure an appropriate gauge of
wire is installed between strip light
and LED driver.
See VOLTAGE
DROP CHARTS.
Some LEDs
are not
functional
• Ensure strip light has not been bent
excessively, which could damage
circuitry.
• Ensure strip light has not been
submerged in any liquid for any
amount of time.
Lights are
flickering
• Ensure a compatible driver and/or
dimming control is installed. Check
for loose connections.
Lights are
turning on/off
repeatedly
• Ensure driver is not overloaded. An
overloaded driver will trip the internal
auto-reset (of driver) repeatedly,
turning the system on/off.
6
Wire
Gauge
10 W
.42 A
20 W
.83 A
30 W
1.3 A
40 W
1.7 A
50 W
2.1 A
60 W
2.5 A
70 W
2.9 A
80 W
3.3 A
100 W
4. 2 A
18 AWG
134 ft.
68 ft.
45 ft.
33 ft.
27 ft.
22 ft.
19 ft.
17 ft.
14 ft.
16 AWG
215 ft.
109 ft.
72 ft.
54 ft.
43 ft.
36 ft.
31 ft.
27 ft.
22 ft.
14 AWG
345 ft.
174 ft.
115 ft.
86 ft.
69 ft.
57 ft.
49 ft.
43 ft.
36 ft.
12 AWG
539 ft.
272 ft.
181 ft.
135 ft.
108 ft.
90 ft.
77 ft.
68 ft.
56 ft.
10 AWG
784
ft.
397 ft.
263 ft.
197 ft.
158 ft.
131 ft.
112 ft.
98 ft.
82 ft.
24V Voltage Drop & Wire Length Distance Chart
Example: 24V Voltage Drop & Wire Length Distance Chart
Determine load size. Let’s assume
load is 55 W. Round up to nearest
load.
1
Determine distance from driver
to load. Let’s assume the
distance is 90 ft.
2
It is recommended to install 12 AWG to
eliminate excess voltage drop.
3
VOLTAGE DROP CHART
For best performance and lumen output, ensure proper wire gauge is installed to compensate for voltage drop of low voltage circuits.
7
