3 OF 5
IG050919-4.0
DMX ZONE CONTROLLER
INSTALLATION GUIDE
PINOUT CONNECTION GUIDE
DYNAMIC MODE CHART
SETTING DMX ADDRESS
Each DMX decoder or DMX luminaire needs to be addressed correctly so the controller
can distinguish between each decoder. To pair a DMX decoder or luminaire to a specific
zone of the controller (1-3), set each decoder/luminaire to one of the following addresses:
•
Zone 1: Set to address ‘001’ (will be fixed to address 001 – 004)
•
Zone 2: Set to address ‘005’ (will be fixed to address 005 – 008)
•
Zone 3: Set to address ‘009’ (will be fixed to address 009 – 012)
Each zone of the controller is fixed with 4 DMX addresses to control the 4 channels:
CH1 – Red, CH2 – Green, CH3 – Blue, CH4 – White or X.
Example of DMX Addressing Display
Digital Display
The following diagrams/tables indicate the appropriate connections for patching your own CAT5/RJ45, and XLR-3 splice cables. These diagrams
are for general reference and may slightly differ between different cable manufacturers.
1 2 3 4 5 6 7 8
The Dynamic Mode tool plays factory-programmed
scenes. Choose up to 10 different scenes. Short
press switches/pauses the mode. Long press
adjusts speed of the dynamic mode.
Mode
Description
1
Fade 1 - B M R O Y G C
2
Fade 2 - B G O W C M B
3
Fade 3 - R W C G C W B W
4
Skip 1 - R Y W C G W B M W Y
5
RGB Fade In/Out
6
RGB Fade In
7
RGB Fade Out
8
RGB Skip
9
Fade 4 - B M O G C
10
Fade 5 - W Y W M C W G W M C
11
All Channels Off
Pin No.
Wire Color
Function
1
White/Orange
Data +
2
Orange
Data -
3
White/Green
None
4
Blue
None
5
White/Blue
None
6
Green
None
7
White/Brown
May be used as 2nd ground
8
Brown
Ground
Pin No.
Function
1
Ground
2
Data -
3
Data +
Once DMX address is set on luminaire or DMX decoder, ensure to Press Zone 1, 2, or 3 on the controller to control desired zone.
