DiO PROBO Z, User Manual, Page: 19 / 23

37 36
3D Printer DIO PROBO Z User Guide
DIO PROBO Z maintenance
If the printer is not be used for an
extended period, unplug the power
cable of the printer and store the
printer in a shade area to keep it
stored for a long time without failure.
In case resin has fallen or spilt inside
the printer, use alcohol to an industrial
wiper and clean it.
Vat and Resin maintenance
Vat maintenance
Remove the used resin completely from the vat with an
industrial wiper.
If you clean the resin with tissues Instead of an industrial wiper,
dust could be stick with the vat film, thus influencing the output.
And if a different type of resin or water is mixed into it, it may
have a negative influence on the print output quality.
Sheet surface
Resin residue
In case there is residue on the vat
- Use silicone spatula to remove debris.
- When removing debris, be careful not to damage the film
Maintenance
For a longer service life, the proper maintenance is key.
Here is guideline for 3D printer and consumables maintenance.