www.getdio.com
EN | 4
Installation
I. Installing the motor
Please follow the instructions for your shutter or blind to remove it and gain access to the roller.
Warning
, before installing the motorised unit, make sure you
block off the existing wired switch
if you had an electrical installation or remove any equipment which is not needed for a motorised
operation such as the strap or the hand crank.
Warning
, before installing, check that the motor is suitable for the shutter to be automated (see
product box).
1
Measure the exact distance between the following two points (see diagram):
2
Insert the motor into the shutter roller, taking care to align the octagonal ring mark with the
adjustment line located on the head of the motor
. Only the head of the motor may extend
beyond the roller.
+
