Handheld Optical Power Meter
10
Chapter 5 Software
5.1 Install the device
Run the software in the PC, find the “CH341SER-CH340T” as shown below
Double click that “exe” program. This will initiate program. See fig. 5-1
5-1
Click “INSTALL”. after you will see the following, Fig 5-2
5-2
Press “OK”, to exit this install interface.
However, the driver still has not installed yet, therefore continue the following operation:
Use USB cable connect with power meter and the PC, switch on the instrument, See Fig 5-3
5-3
