UC8000 IPPBX User Manual
14
Fail2ban is a log-parsing application that monitors system logs for symptoms of an
automated attack on your system. When an attempted compromise is located, using
the defined parameters, Fail2ban will add a new rule to block the IP address of the
attacker, either for a set amount of time or permanently. Fail2ban can also alert you
through email that an attack is occurring.
Figure 5.2.3 Fail2ban
Note:
For the explanation of parameters related to Fail2ban, please refer to the
Network ->Fail2ban section.
5.2.4 Current Call
On the
Status->Current Call
interface, the source, destination, caller number, called
number, start time, answer time, state and duration of the current real-time call are
displayed. If there is no current call, no information will be shown.
Figure 5.2.4 Current Call Information
5.2.5 Conference
The
Status -> Conference
interface displays the current conference status,
conference information, operation records, etc.
