SIP Trunk
11
SIP trunk can realize the connection between UC120 and IP PBX or SIP servers.
If UC120 is regarded as a terminal and intends to register to a server, you need to configure a SIP trunk connecting UC120
and the server, and then enable register for the SIP trunk.
If the FXS f UC120 intends to register to a server, you need to configure a SIP trunk connecting UC120 and the server, then
enable register for the port and designate the SIP trunk to it.
Configure outbound/inbound rule
12
On the Call Control
→
Route interface, you can configure routes for incoming calls and outgoing calls.
For the outbound route rule, destination can be FXO trunk, GSM trunk and SIP trunk;
For the inbound route rule, the destination can be SIP extension, FXS extension, local extension, ring group or IVR