29
To interrupt the HOLD function and go back to the PRESETTING
phase before
15
seconds have passed, simply turn one of the two
ENCODER knobs (E1-E2).
E2
E1
The HOLD function can be terminated ahead of time even while
once again starting the welding.
Once
15
seconds have passed (HOLD FUNCTION) the control
panel goes back to the PRESETTING phase.
Special processes
On request the welding machine can be equipped with additional
welding programs, by having some software packages activated,
against payment.
DIX ARC COOL (CLd)
This is an innovative MIG/MAG process with low heat transfer,
developed for welding thin plating and MIG brazing in all welding
positions. The synergic DIX ARC COOL programs make optimum
quality welding possible, with minimum deformation and changes
in metallurgical characteristics.
For this reason, the
DIX ARC COOL
software is also an excellent
solution for welding open joints.
DIX ARC MEGA FAST (SPd)
This is an innovative MIG/MAG process developed for welding
steel and non ferrous materials that, due to the increased mag-
netic resistance of the arc and the tighter cone, allows a significant
increase in welding speed. This process causes lower heating up
at the base material, minimising deformation and making it pos-
sible to reduce work and finishing times for the welded item.
DIX
ARC MEGA FAST
makes it possible to speed up welding com-
pared with short arc and mixed arc MIG/MAG welding, greatly in-
creasing productivity.
EXTENDED CURVES PACKAGE (ECP)
This is a package of additional curves, dedicated to highly special-
ised machining and procedures.
To set the welding machine and make use of the special pro-
cesses purchased, the operator must refer to the relevant
functions and programs table sold with the software.
Electrode (MMA)
Start the welder by pressing the switch, located on the back pan-
el, at the position
I
.
1 - WELDING PROCESS SELECTION
Select the ELECTRODE PROCESS of welding (for welding with
“HOT START” and “ARC FORCE” devices, programmable by the
user) pressing and releasing, even various times if necessary, the
WELDING PROCESS SELECTION key (T2) until the correspond-
ing LED lights up.
T2
Push the SELECT PROGRAM key (T5). The corresponding LED
switches on.
T5
2 - SELECTION OF WELDING PROGRAM
PROGRAM TABLE
PRG
MMA PROCESS
MATERIAL
DISPLAY
TYPE
CLASS
Basic
E7018
MMA
bAS
Rutil
E6013
MMA
rUt
Cr-Ni
E316L
MMA
Crn
Select the welding PROGRAM by pushing the SELECT PRO-
GRAM key (T5), and then rotate the ENCODER - V (E2) Knob
until the VIEW PARAMETERS - V (D2) display shows the program
required, chosen according to the type of electrode to be used (ba-
sic, rutile, and chrome-nickel).
D2
E2
T1
T5
3 - SPECIAL FUNCTIONS “Fx” SELECTION
ADJUSTABLE FUNCTIONS “Fx”
Fx > 3s
FUNCTION
DISPLAY
SETTINGS RANGE
FACTORY
RANGE
HOT START
Hot
50
0 ÷ 100
ARC FORCE
ArC
50
0 ÷ 100
PROGRAM DEFAULT
dEF
no
no - YES
