36
Error condition
Error code
Error description and possible diagnosis
Err
E4.2
MIG SYN SPECIAL FUNCTION “Fx” WRONG
NON automatic reset error. Immediately contact technical assistance dept.
Err
E4.3
MIG MAN SPECIAL FUNCTION “Fx” WRONG
NON automatic reset error. Immediately contact technical assistance dept.
Err
E4.4
SPECIAL “Fx” PULSED MIG FUNCTIONS NOT VALID
NON automatic reset error. Immediately contact technical assistance dept.
Err
E5.0
MIG PROGRAMS MISSING
NON automatic reset error. Immediately contact technical assistance dept.
Err
E5.1
NO PULSED MIG WELDING PROGRAMS
NON automatic reset error. Immediately contact technical assistance dept.
Err
E5.3
PROGRAMS MISSING
NON automatic reset error. Immediately contact technical assistance dept.
Err
E5.4
NO WELDING PROGRAMS
NON automatic reset error. Immediately contact technical assistance dept.
The table includes
2
types of errors:
•
Automatic reset error:
Once the alarm condition has been re-
solved the welding machine starts working again and the oper-
ator can weld again!
•
NON automatic reset error:
To remove the alarm status and
reinstate correct operation of the machine, the welding equip-
ment must be switched off.
The machine will then be working again and the operator can
weld again!
PLEASE NOTE: If, when switching on, the error status pre-
sents itself again, immediately contact the Technical Assis-
tance Department.
This is necessary so that our technical assistance dept (
that must
be contacted each time the error messages appear on the
welding machine’s operator interface
) is able to resolve the
problems more easily and as quickly as possible, thanks to the re-
ports by the user, and also because, in the meantime the welding
machine does not allow the operator to do their work.
