Dini Argeo 3590EGT Series, Technical Manual, Page: 8 / 64

3590ET - 3590EGT_Serial_Commands
8
4. Commands divided by argument
1.1 Weight reading commands
1.2 Weight setting commands
1.3 Scales commands
Command Description Page
RALL Reading of the scale data 41
READ Reading of the scale weight 43
REXT Reading of the scale weights 44
GR10 Get the net weight in high resolution 26
R Reading of the scale weight 40
Command Description Page
SPMU Sets the average piece weight in the set AVG unit 47
STPD This command is the same as STPT 47
STPT Setpoint setting 49
T Semi automatic tare function 50
TARE Semi automatic tare function 50
TMAN Preset tare function 50
W Preset tare function 53
X Sets the average piece weight in the set AVG unit 55
ZERO Zero scale function 56
Z Zero scale function 56
Command Description Page
CGCH Change the weighing channel 17
CMDOFF Turns the indicator off 18
CMDRESET Restarts the indicator 18
CMDSAVE Save the setup parameter 18
CMDSETUP Enter in the setup environment 19
FREZ Stores the present data weights in the scale frozen data area 23
MVOL Get the micro Volts of the selected instrument channel 33
NTGS Switches the main weight display value from gross to net and vice versa 34
Q Change the weighing channel 39
RAZF Get the ADC value of the selected instrument channel 42
SN Reading of the instrument serial number 47
STAT Reading of the instrument working state 48
VER Reading of the instrument model and firmware version 52