User’s Manual of DingTec® Laminators – BU-380 to 2040 Cold Laminator Series
6
One person should put the film under the roller and let the folded padding paper show
up, then secure the padding paper by hands (you can also put the pressing roller on
the picture). Another person should turn the handle clockwise at the same time and
laminate the film and the picture together. Make sure the film with upper rubber roller
should be smooth and the rolled film should be lower than the rollers. While dragging
padding paper, the user should drag it at a constant speed and keep pace with the
spinning rollers.
Figure 11
III. Electric Cold Laminator
The main difference between the manual cold laminator and the electric cold
laminator is the electric control part. With the adjustable speed, it is easier to operate and
more efficient. The laminating methods are similar to that of the manual cold laminators.
Figure 12
Using Electric Cold Laminator
(1) Connect to power: plug one side of the power cord into the machine and another side
to the socket.
(2) Operation: Select the rotating direction first. Based on the direction, the upper switch
is standard rolling, while the lower switch is the reverse rolling. Push upper
operational switch to start while push the lower to stop.
