background image

Dingo K9-2 Operation & Maintenance Manual

5

Safety

General Operation

Read, understand, and follow the 

instructions in the operation and 

maintenance manual before using the 

Dingo. Improper use can result in injury.

Keep hands, feet and clothing away from 

all moving parts.

Allow only responsible adults who are 

familiar with the Dingo and its operation to 

use the Dingo.

It is the operators responsibility to 

operate away from pedestrians and 

establish appropriate isolation measures.

Never carry passengers, and keep pets and 

bystanders away from the Dingo.

Do not refuel with the engine running, or 

while you or someone near is smoking.

Do not operate any of the control levers 

(including  auxiliary  lever)  unless  you  are 

standing with both feet on the platform and 

firmly holding the grip handles.

Wear appropriate clothing including hard 

hat, safety glasses, long pants, and safety 

shoes.

Do not exceed the rated operating 

capacity.

Do not place feet under the platform.

Watch where you are driving. Always look 

down and behind, before and while 

reversing.

WARNING

 

Engine exhaust 

contains 

Carbon Monoxide

, which is an 

odourless, deadly poison.  Carbon 

Monoxide can kill you.  Do not run engine 

indoors or in a confined space.

Always lower Dingo arms and/or place 

attachment  on  the  ground  when  parking 

or leaving the Dingo unattended.  Always 

stop the engine if leaving the operators 

platform.

IMPORTANT

  

Do not carry a load or 

heavy attachment with the Dingo arms in a 

raised position.  Do not step off the platform 

with a load raised.

Never jerk the control levers.  Use a steady 

motion.  Slow down before turning.  Sharp 

turns may cause loss of control.

Stop the engine before making any 

adjustments to the attachments or the 

machine. 

WARNING

 

Never weld on or near the fuel 

tank whether it is empty or full.

Do not operate on or near embankments.  

Look out for ditches, holes,  etc. and beware 

of traffic when near roads.

Operate  only  in  daylight  or  good  artificial 

lighting.

Do not operate equipment while under the 

influence of alcohol or drugs, or while 

otherwise impaired.

Use extra care while loading or unloading 

the Dingo onto a trailer or truck.

Do not touch equipment or attachment parts 

that may be hot from operation.  Allow to 

cool before attempting to maintain, adjust 

or service.

Never let children or untrained people 

operate or service the Dingo.

REMEMBER - Safety is your 

responsibility.

Summary of Contents for K9-2





















Reviews: