DINGO F, User Manual

Page: 29 / 106

27
Basic Operations
DIGNO
®
F
Entering Sleep Mode
After a period of no operation, Display goes out and handset
enters Sleep mode. Alternatively, Press
to enter
Sleep mode. This saves battery power and prevents accidental
Touchscreen operation.
Exiting Sleep to Access Start Screen
In Sleep mode,
Start Screen appears.
Accessing Home Screen from Start
Screen
In Start Screen, Drag/Flick
Home Screen or the screen before entering Sleep appears.
・Set a security lock for the Start Screen. For details, see
" Start Screen Settings ."
・In Start Screen, Drag/Flick
/ to quickly activate
Phone/Camera.
Updating Software
Before Updating Software
Saved data may be lost depending on condition of handset
(malfunctioning, damaged, water seepage, etc.). It is
recommended that you back up important data before
updating software. SoftBank Corp. is not responsible for
damages from loss of data.
Software Update Cautions
During Update
Handset cannot be used until software is updated. It may
take time to update software.
Signal during Update
Operate handset where signal reception is good and
without changing location. Also operate with adequate
battery charge. Signal becoming weak or Battery becoming
low during an update may cause an update failure. An
update failure may disable handset.
If Using Other Functions
Other functions cannot be operated during a software
update.
Updating Software
Handset checks at a preset time whether an update is
required, and automatically updates the software if required.
Follow these steps to update software manually.
In Home Screen, (Apps) (Settings)
About phone