DHM-15 HEIGHT AND WEIGHT MACHINE
10
The Settings of Coin Acceptor
1. Setting
a) Turn on the machine
b) Move the switch of “MGM, NOM, MAX” at the rear part of the coin acceptor to the
position of “NOM”, and then move the switch of “set, start” to the position of “set”.
c) Choose coins of different versions and degrees of wear, and then use these
coins (both the front sides and the reverse sides) to try the coin acceptor, the
coins will come out from the outlet at the bottom of the acceptor. If the acceptor
produces a sound like “di”, it indicates the successful setting. This coin acceptor
can remember as many as 45 kinds of coins.
d) At the end please move the switch of “start, set” to the position of “start”.
2. Clearance
a) Move the switch of “MGM, NOM, MAX” at the rear part of the coin acceptor to the
position of “NOM”, and then move the switch of “start, set” to the position of “set”.
b) Press the key of “clearance” (besides the label 145) on the side of the acceptor
for 5 seconds, until you hear the sound like “di”, which indicates the original
memory has been cleared. You’d better firstly clear the memory before resetting
so that the acceptor can remember coins as many as possible.
3. Usage
Move the switch of “MGM, NOM, MAX” at the rear part of the coin acceptor to the
position of “NOM”, and then move the switch of “start, set” to the position of “set”.
Test the acceptor with coins which are settled in the acceptor’s memory. If the coin
is false, the acceptor will spit it out automatically.
Attention: before leaving the factory, the coin acceptor has already been set by the
manufacturer, so please do not adjust it at ease. If the coin acceptor makes a
warning sound, firstly please cut off the power supply and then make checks as
below: whether the switch of “start, set” is moved to the position of “start”; whether
the wire of power supply is loosening, or the coin is stuck in the acceptor.
