45
©
Dinel, s.r.o. PDU–4xx–W
Default and user's settings list
Active current output configuration (“OUtP” menu)
Omod
Current output mode
„0-20” (mA)
OUtL
Display value for 0 mA or 4 mA (depend
„Omod”) current output
0.0
OUtH
Display value for 20 mA current output
100.0
Lo r
Extension of the bottom of the nominal
output range
5.0 (%)
Hi r
Extension of the top of the nominal output
range
5.0 (%)
AL
Current output value on critical exception
22.1 (mA)
Display parameters
bri
Display brightness
bri6
Configuration of peaks detection function (“HOLd” menu)
modE
Kind of detected changes
norm
PEA
Minimum detected change
0.0
timE
Maximum time of peak displaying
0.0
HdiS
The type of displayed value
HOLd
H r1
Source of relay R1, and LED R1 control
rEAL
H r2
Source of relay R2, and LED R2 control
rEAL
HOUt
Source of current output control
rEAL
Settings of access to the configuration parameters (“SECu” menu)
A r1
Permission to changes of relay R1
threshold without of the user password
knowledge
On
A r2
Permission to changes of relay R2
threshold without of the user password
knowledge
On
Default and user's settings list
RS 485 interface configuration (menu “rS”)
Addr
Device address
0
bAud
Baud rate
9.6
mbAc
Permission to changes of configuration
registers
On
mbtO
Maximum delay between received
messages
0
rESP
Additional delay of answer transmission
Std
Configuration of numerical parameters edition
Edit
Numerical parameters edit mode
dig
