CLS–23
©
Dinel, s.r.o.
10
CLS–23_–_–_–S–_
Positive pole (+ U) of power supply
is connected through a load (relay) to
brown (blue) wire or pin connector No.
1, negative pole is connected to white
wire or pin connector No. 3.
Typ
CLS–23_–_–_–P–_
Positive pole (+ U) of power supply is
connected to brown wire or pin connec
-
tor No. 1, negative pole is connected to
blue wire or pin connector No. 3. Load
(relay) is connected to black wire or pin
connector No. 4.
+U
0V
BN (1)
WH, BU (3)
+U
0V
BN (1)
BU (3)
BK (4)
+U
0V
BN (1)
WH, BU (3)
+U
0V
BN (1)
BU (3)
BK (4)
Typ
CLS–23_–_–_–R–_
Brown wire or pin connector No. 1 is
connected to positive pole (+U) of In
-
trinsically safe supply unit. Blue wire or
pin.connector No. 3 is connected to
negative pole of Intrinsically safe sup
-
ply unit.
Electrical connection must be done in de-energized state! For switching supply sources,
it is necessary to check that the input is galvanically separated from the network side
and that they are fitted with a filter suppressing the conforming interference (terminals
+ and – oscillate together towards the ground potential), or the interference is removed
in another manner.
Fig. 7: “S“ type sensors connection
(2 - wire electronic switch)
Fig. 8: “P“ (PNP) type sensors connection
Fig. 9: “R“ (NAMUR) type sensors connection
Legend:
(1...3)
– Terminals number for variants with connector
BN
– Brown
WH
– White
BK
– Black
BU
– Blue
Fig. 10: Inside of the connector socket
Output
(BK)
0V (BU)
+U (BN)
