AVAILABLE ONLY FOR RAPID BIKE RACING MODULE
Dimsport Srl
Zona Industriale Madonnina - Loc. San Iorio, 8 B
15020 SERRALUNGA DI CREA (AL) - ITALY
T (+39) 0142.9552 F (+39) 0142.940094
E-mail:
is a company of
QS
MODE
6 Gear*
N
Gear* Cut-off
+
̶
Increases kill time (Cut-off)
(max +20ms)
Reduces kill time (Cut-off)
(max -19ms) and turns QS
feature OFF.
TC
MODE
RPM
Traction Control
+
̶
Increases TC sensitivity
(max +5 point)
Reduces TC sensitività
(max -5 point) and turns TC
feature OFF.
EB
MODE
+
̶
Reduces engine braking
(max -19 points) and turns
EB feature OFF.
RPM
Engine Brake
Increases engine braking
(max +20 point)
EB:
modifies the engine braking feature setting
during deceleration to decrease/increase
engine’s braking force. LEDs scale shows RPM,
display shows the adjustment applied over the
value being already set inside the module using
RB software.
QS
: allows modifying kill time of quickshifter
feature in order to ensure the best
performance. LEDs scale and display show the
actual gear information (if available) and the kill
time adjustment applied over the value being
already set inside the module using RB
software.
TC:
activates traction control feature and
modifies sensitivity setting over the value being
already set inside the module using the RB
software, to improve safety in all riding
conditions. LEDs scale shows RPM, display
shows the adjustment.
LC
MODE
TPS
RPM-START
+
TPS
ON
LC:
activates launch control by pushing
(+) button. Display shows
ON
.
TPS
1 ON
Open the throttle, LEDs scale shows reference of
TPS opening. Display confirms
Step 1
: Rapid Bike
module holds engine RPM at the required level.
Step 2
activates while releasing the
clutch: engine accelerates while
power output is controlled
preventing rear tyre from spinning
TPS
2 ON
TPS
RPM
RPM Stop
value in the Rapid
Bike software sets at how
many engine RPM
Step 2
comes to an end: LC is
automatically disabled and
YOUTUNE switches to default
mode (RPM or the feature
previously stored)
All values and parameters modified by operating with YOUTUNE can be
permanently stored in the module’s memory by pushing
MODE
button.
Rider can restart the bike with the latest configuration.
We highly recommend to download complete manual from
www.rapidbike.com