EN-8
452115.66.39 · FD 9707
English
Smart-RTC+
4.5 Commissioning
4.5.1 RTM Econ A⁄U
The RTM Econ A/U is commissioned as shown in Fig. 4.13 on
page 8. The correct sequence must be observed. The addresses
are allocated as shown in Fig. 4.13 on page 8.
NOTE
º
If 'Cn' appears on the RTM Econ A
⁄
U display, communication to the heat
pump manager has been interrupted. In this case, please check the wiring
and settings, and restart the devices if necessary.
NOTE
º
If communication cannot be established, the address set on the
RTM Econ A
⁄
U and the BUS line must be checked.
NOTE
º
Activating the room temperature control or changing the room set
temperature can initially result in the room temperature being exceeded.
Fig. 4.13:
Summary of Contents for Smart-RTC+ RTM Econ A
